1.3 Circuit Connection

1.Collect all the components required :

2.  Now, connect the components and make the robot assembly  as instructed in the chapter-5

Note: Take the chassis and connect the motor clip with the Chassis then connect the motors on the clips.At the last attach the wheels as shown:

3. After this, connect all the four motors with the motor driver.

As you are aware Motor have two wires:

                         *Positive 

                        *Negative

  • Connect the two wires of Motor1 with the 01 and 02 pin of the motor 1 in the motor driver.
  • Connect the two wires of Motor2 with the 01 and 02 pin of the motor 2 in the motor driver.
  • Similarly ,connect motor3 and motor4.

4. Now, connect the motor driver with the remote control using connecting cable as shown: 

Back to Lesson