HC‐05 module is an easy-to-use Bluetooth SPP (Serial Port Protocol) module, designed for a transparent wireless serial connection setup. The HC-05 Bluetooth Module has 6 pins. They are as follows:
ENABLE: When enable is pulled LOW, the module is disabled which means the module will not turn on and it fails to communicate.
VCC: Supply Voltage 3.3V to 5V
GND: Ground pin.
TXD & RXD: These two pins act as a UART interface for communication.
STATE: It acts as a status indicator.
BUTTON SWITCH: This is used to switch the module into AT command mode. To enable AT command mode, press the button switch for a second.
Login
Accessing this course requires a login. Please enter your credentials below!