Monitoring plant health is very important for their fast growth. In this busy world, people usually forget to water their plants which leads to bad growth and health of their plants. For ensuring the complete development of plants it is necessary to develop proper surrounding conditions in which plants grow.
 The following data will display on the screen:
A moisture sensor will sense the amount of moisture present in the soil.
The humidity of the surrounding is sensed by the Humidity sensor DHT11 sensor.
The temperature of the surroundings is sensed by the Humidity sensor DHT11.
The amount of sunlight is sensed by the LDR sensor.
Aim of the Experiment :
To monitor the plant health using Soil moisture Sensor, DHT11 and LDR Sensor.
Minimum Requirements :
Arduino Uno
LDR Sensor
DHT11 Sensor
Bluetooth Module
Soil Moisture Sensor
10K Ohm Resistor
Jumper wires
Breadboard
Water pump(DC) :-
DC powered pumps use direct current from motor, battery, or solar power to move fluid in a variety of ways. Motorized pumps typically operate on 6, 12, 24, or 32 volts of DC power. We will use this water pump to power the water to the plants. Water pump have two pins:
Positive(Red)
Negative(Black)
Login
Accessing this course requires a login. Please enter your credentials below!